新闻动态
路沿石模具维护保养
路沿石模具维护保养
Maintenance of Stone Mould along Road
1、长时间使用路沿石模具后必须磨刃口,研磨后刃口面必须进行退磁,不能带有磁性,否则易发生堵料。
1. The edge must be grinded after long-term use of the stone mould along the road. After grinding, the edge surface must be demagnetized. It must not be magnetic. Otherwise, plugging easily occurs.
2、路沿石模具在使用过程中冲头易出现折断、弯曲和啃坏的现象,冲套一般都是啃坏的。冲头和冲套的损坏一般都用相同规格的零件进行更换。
2. The punch of the roadside stone mould is easy to break, bend and gnaw during its use. The punch sleeve is generally gnawed. The damage of punch and punch sleeve is usually replaced by parts of the same specification.
3、路沿石模具保养时检查各部位的配件关系及有无损坏,对损坏的部分进行修复,气动顶料检查有无漏气现象,并对具体的情况采取措施。
3. Check the parts relationship and whether there is any damage during the maintenance of the stone mould along the road, repair the damaged parts, check whether there is air leakage in the pneumatic jacking material, and take measures to the specific situation.
4、路沿石模具弹簧等弹性零件在使用过程中弹簧最易损坏,通常出现断裂和变形现象。采取的办法就是更换,在更换过程中一定要注意弹簧的规格和型号,弹簧的规格和型号通过颜色、外径和长度三项来确认,只有在三项都相同的情况下才可以更换。
4. Elastic parts such as the springs of stone mould along the road are most vulnerable to damage in the course of use, and usually appear fracture and deformation. Replacement is the way to take. In the process of replacement, we must pay attention to the specifications and models of springs. The specifications and models of springs are confirmed by three items: color, outer diameter and length. Only when the three items are the same, can they be replaced.

联系方式

  1. 保定市模具制造有限公司
  2. 电话:13313028229

版权 © 保定市路沿石模具厂 网址:www.bdkscm.com  推荐:水沟模具,路边石模具,生态护坡模具,路沿石钢模具